Skip to content
Aerial view of a two-story home with a terracotta barrel tile roof

Tile Roofing Contractor in Miami

Art's Roofing is a licensed tile roofing contractor in Miami for clay and concrete tile: new installs, repairs to leaking or broken tile, and lift-and-relay when the tile is still good but the underlayment underneath is worn. We work across Miami-Dade, Broward and Palm Beach from our office in Coral Gables.

Active leak? We can tarp it the same day while we work out the repair.

5.0 ★★★★★ 155+ Google reviews
  • ★★★★★
    Wow! Art’s team was absolutely top-notch. They communicated exceptionally well, were incredibly flexible, and catered perfectly to my needs. Best of all, they left absolutely zero mess behind. I cannot recommend them highly enough!
    Maikel Toledo · Google
  • ★★★★★
    Amazing experience with Juan, George and the whole team! The roof turned out beautifully! They came when they said they would and nothing fell behind schedule. They also cleaned the area throughout the project making sure everything was safe from nails or other debris. Would recommend to anyone looking to redo their roof! Top tier communication, professionalism and amazing workmanship!
    Saily M Gutierrez · Google
  • ★★★★★
    Arts Roofing delivered an exceptional roof and windows project for us. Eddison, the project manager, was professional, organized, and ensured the work was completed efficiently with top-quality results.
    Dash Equity · Google

Florida roofing license CCC1333598 · GAF Certified Commercial Contractor · BBB A+

Last updated: · License holder: Arturo Stadthagen, Florida Certified Roofing Contractor CCC1333598

Top-down view of a terracotta tile hip roof between two homes with tan tile roofs

Overview

Tile is the classic South Florida roof, and most tile-roof problems we see are not really about the tile. The tile sheds most of the rain and takes the sun; the underlayment beneath it stops the water that gets past. When a tile roof leaks, the cause is usually worn underlayment at a valley, a wall, a penetration or the eave, or a broken tile that let sun and water reach that layer.

That is why we look under the tile before we quote anything. Sometimes the fix is a few replacement tiles that interlock with your profile. Sometimes it is a local repair to one valley. Sometimes the underlayment is worn across the whole roof and the choice is between lift-and-relay and a full replacement. We put the approval numbers, the attachment method and the scope in writing so you can compare.

What it includes

  • Clay and concrete tile in flat, low and S (barrel) profiles
  • Leak repair at valleys, walls, penetrations and eaves
  • Broken and slipped tile replacement with tiles that interlock with your profile
  • Lift-and-relay with new underlayment and flashings when the tile is still sound
  • Full tile roof replacement under permit in Miami-Dade, Broward and Palm Beach
  • Product approval (NOA) numbers and attachment method listed in every proposal
Close-up of terracotta S-tile rows and mortar-set ridge caps

When to repair vs. replace a tile roof

If a few tiles are broken and the underlayment under them is sound, the fix is replacing those tiles with ones that interlock with your profile. If one valley, wall or penetration has failed, we lift the tiles at that spot, replace the flashing and underlayment locally, and re-set the tile. That is ordinary roof repair, and it should be done soon: a broken tile lets sun and water reach the layer underneath (see why tile roofs leak).

When the underlayment is worn across the roof but most tiles are intact and still matchable, lift-and-relay keeps your tile and replaces everything under it. When the profile is discontinued, many tiles are cracked, or you want a different look or a lighter roof, a full roof replacement makes more sense. Damaged, cracked or broken tile can't be reinstalled under Florida's code either way. We explain the trade-offs in tile lift-and-relay vs. replacement.

Tile roof installation and repair in Miami-Dade and Broward

Miami-Dade and Broward are the High-Velocity Hurricane Zone (HVHZ). There, every roofing component needs a valid, current product approval, which in Miami-Dade is usually a Notice of Acceptance (NOA). The tile's approval lists the attachment methods allowed, whether nails, screws, clips, foam adhesive or mortar, and the resistance each one gives. We install the system the approval describes and list the numbers for the tile, underlayment and adhesive or fasteners in the proposal. Our tile roofing guide covers clay vs. concrete and attachment in more detail.

A lift-and-relay is a reroof, so it needs a permit and is installed and inspected like a new tile roof, with reused tile. In the HVHZ, inspections happen during underlayment and tile installation, and foam- or mortar-set systems get a field uplift test (TAS 106) before final. The deck is checked and fastened to code either way. Under the 25% rule, repairing or replacing more than 25% of a roof section in 12 months can require bringing the whole section to current code, unless the roof was built under the 2007 Florida Building Code or later.

How much does a tile roof cost in Miami?

Our 2026 Miami cost guide puts a full concrete or clay tile replacement on a typical single-family home (about 2,000–2,800 sq ft of roof) at roughly $35,000–$70,000+, turnkey. Where your roof lands in that range depends on the tile material, profile and availability, the attachment method and how many fasteners or adhesive paddies the calculations call for, the underlayment and flashings, valleys, hips and penetrations, and any deck repairs found once the tile is off. For lift-and-relay, careful removal and replacement tiles matter too. The cost guide walks through what drives the number.

If the timing is tight, we offer roof financing in Miami with 0% down through PACE, Ygrene and GoodLeap, and you can qualify in about 5 minutes. When lift-and-relay and replacement are both on the table, we price them the same way so you can compare.

Areas we serve

We repair and install tile roofs in Miami, Coral Gables, Miami Beach, Pinecrest, Kendall, Hialeah, Fort Lauderdale and West Palm Beach, and across Miami-Dade, Broward and Palm Beach.

How it works

  1. Free inspection

    We check the tile and look under it at the likely leak spots, and photograph what we find.

  2. Repair, relay or replace

    We tell you which option fits your roof and, when it is close, price lift-and-relay and replacement side by side.

  3. Permit & install

    We pull the permit, inspect the deck, and install the underlayment, flashings and tile as the product approval requires.

  4. Inspections & close-out

    We schedule the staged inspections, including the uplift test where the system needs it, and close the permit.

Permits, timeline and warranties

Questions to ask any contractor

  • Is the leak coming from the tile or from the underlayment under it?
  • Is my tile profile still made, and where will replacement tiles come from?
  • What NOA covers the tile, underlayment and adhesive, and which attachment method will you use?
  • Can you price lift-and-relay and full replacement in the same proposal?

Ask us the same four. We answer them in writing on every estimate.

Questions about tile roofing

  • Why is my tile roof leaking if the tiles look fine?

    Because the tile only sheds most of the water. The underlayment under it stops the rest, and it usually wears out first at valleys, walls, penetrations and eaves, or wherever a broken tile let sun and water reach it. From the street the roof can look perfect while that layer is worn through.

  • What is a tile lift-and-relay?

    We remove your tiles by hand, replace the underlayment and flashings down to the deck, then reinstall the sound tiles plus matching replacements for the broken ones. It keeps the look of your roof. It works when the tile is in good shape and can still be matched.

  • Do I need a permit for a tile roof repair or lift-and-relay?

    A lift-and-relay or replacement is a reroof and needs a permit. In Miami-Dade and Broward permits are required for work on roofing components, and larger repairs can trigger the 25 percent rule. We tell you which applies before we start and pull the permit ourselves.

  • Clay or concrete tile, which is better in Miami?

    Both work well in South Florida when installed as an approved system. Clay is fired and often glazed; concrete is cement and aggregate. The choice usually comes down to the look you want, the weight your structure can carry, whether the profile is available, and budget.

  • Can I switch from shingle to tile?

    Often, but tile is heavy, so the framing has to be evaluated first. That typically means a structural review by a licensed engineer, and the building department decides what it needs with the permit. Re-roofing tile with tile of similar weight usually does not change the load.

  • Is Art's Roofing licensed for tile roofs?

    Yes. We are a Florida Certified Roofing Contractor, license CCC1333598, based in Coral Gables, with a 5.0 star rating from 155 Google reviews. Inspections and estimates are free.

Not the right fit if…

Art's Roofing & Construction repairs and replaces roofs in Miami-Dade, Broward and Palm Beach, under permit, with its own crews. We are probably not the right call if:

  • You want the work done without a permit, or the permit pulled in your own name. Every roof replacement here needs a building permit, and it is pulled under our licence (CCC1333598), never the homeowner's.
  • You want a product without a Miami-Dade approval. In the High-Velocity Hurricane Zone we install only products with a Miami-Dade Notice of Acceptance or a Florida Product Approval for HVHZ.
  • You need a firm repair price before anyone has seen the roof. A leak repair is priced after we find the source. The written estimate is free.
  • You want paint or a coating on a roof that is failing. Painting only pays off on a roof that is still sound. We inspect first and tell you if it is not.

Not sure? Call (786) 481-4014 and describe the roof.

Get a written estimate for your roof.

We walk the roof, photograph what we find and send an itemized estimate that lists the Miami-Dade NOA number of every product. If you go ahead, the permit is pulled under our license, CCC1333598.

Which number should we call?

Pick the area closest to you.

Miami-Dade (786) 481-4014 Broward (954) 526-1699
Free Quote

Free estimate in 1 minute

Answer a few quick questions and we’ll reach out.

Step 1 of 5
What do you need?