Flat & TPO Roofing in Miami
Whether it's a TPO roof, modified bitumen or an older built-up system, flat roof repair and replacement in Miami comes down to three things: a membrane that stays bonded, seams that stay closed and water that actually leaves the roof. We work on flat and low-slope roofs on homes, additions and commercial buildings across Miami-Dade, Broward and Palm Beach, and we start every job with a free inspection and photos of what we find.
Active leak? We offer same-day emergency tarping across Miami-Dade and Broward.
- ★★★★★
Wow! Art’s team was absolutely top-notch. They communicated exceptionally well, were incredibly flexible, and catered perfectly to my needs. Best of all, they left absolutely zero mess behind. I cannot recommend them highly enough!
Maikel Toledo · Google - ★★★★★
Amazing experience with Juan, George and the whole team! The roof turned out beautifully! They came when they said they would and nothing fell behind schedule. They also cleaned the area throughout the project making sure everything was safe from nails or other debris. Would recommend to anyone looking to redo their roof! Top tier communication, professionalism and amazing workmanship!
Saily M Gutierrez · Google - ★★★★★
Arts Roofing delivered an exceptional roof and windows project for us. Eddison, the project manager, was professional, organized, and ensured the work was completed efficiently with top-quality results.
Dash Equity · Google
Florida roofing license CCC1333598 · GAF Certified Commercial Contractor · BBB A+
Last updated: · License holder: Arturo Stadthagen, Florida Certified Roofing Contractor CCC1333598

Overview
Flat roofs have a harder life in South Florida than sloped ones. The sun bakes the membrane and dries out seams, summer storms leave water sitting where the drainage is weak, and in the High-Velocity Hurricane Zone the edge metal and attachment matter as much as the membrane itself. Most of the flat-roof leaks we see start at a seam, a drain, a curb around rooftop equipment or a spot where water stays after the rain.
We install and repair TPO and modified bitumen systems on flat and low-slope sections of homes, additions and modern flat-roof houses, as well as offices, retail, warehouses and condo buildings. For larger buildings, phasing and NDL warranties are covered on our commercial roofing page. Either way, you get a written scope that names the approved assembly for your deck, not just a membrane name.
What it includes
- TPO and modified bitumen systems for flat and low-slope roofs
- Leak repair at seams, flashings, drains, scuppers and equipment curbs
- Ponding fixes with tapered insulation, crickets and added drains
- Re-attachment of loose or billowing membranes and edge metal
- Elastomeric roof coating quotes for sound existing roofs
- Free inspection with photos and a written scope

When to repair vs. replace a flat roof
A few open seams, a torn flashing or a leak around one curb, with the deck and insulation still dry, is usually a roof repair. We patch with the membrane's own method: welded TPO on a TPO roof, compatible plies on modified bitumen. A small area that lost its fasteners or adhesion can often be re-attached, as our guide to loose or billowing TPO and EPDM roofs explains.
Widespread loss of attachment, wet insulation or a deck that won't hold fasteners points to a roof replacement. In Miami-Dade and Broward the code also limits repairs: if more than 25% of a roof or roof section is repaired, replaced or recovered in 12 months, the whole roof or section has to be redone. If water stands for more than 48 hours after rain, a patch won't fix it. The slope and drains have to be corrected, which our ponding water guide covers in detail.
TPO roofs in Miami
TPO is a single-ply thermoplastic sheet, usually white, with seams joined by hot-air welding instead of glue or tape. A white TPO roof reflects a good share of the Miami sun, which is why it shows up so often on low-slope homes and commercial buildings; our guide to cool roofs in Miami explains what reflectance does and doesn't do for a building.
We install new TPO roofs and repair existing ones. A TPO repair is welded with compatible TPO, so the old sheet still has to accept a weld; if it doesn't, or the insulation under it is wet, we tell you a repair won't last. In the HVHZ, an approval covers a specific TPO assembly on a specific deck type, so your written scope names the approval and the system in it, not just the membrane.
Elastomeric roof coatings
When an existing flat roof is still sound, a coating can sometimes restore waterproofing for less than a full tear-off. We can quote an elastomeric roof coating on those roofs and will tell you if yours isn't a candidate.
A coating is not a fix for wet insulation, a membrane that has come loose or water that ponds after every rain. Those problems get repaired first, or the roof gets replaced, so we inspect before we quote any coating.
How we install and repair flat roofs in Miami-Dade
Miami-Dade and Broward are in the High-Velocity Hurricane Zone, where the Florida Building Code requires product approval for every roof assembly, and only the components listed in that approval can be used. An approval covers a specific assembly on a specific deck type, so the same membrane can be rated very differently over steel and over concrete. Our TPO vs. modified bitumen vs. EPDM comparison shows how much the deck changes the result.
Before we write a proposal, we check the deck, the insulation and the drainage. Built-up, modified bitumen and single-ply roofs need a design slope of at least ¼ inch per foot, and in the HVHZ repairs must not create additional ponding. If we plan to recover rather than tear off, the existing membrane has to pass a TAS 124 uplift test first. The permit is pulled under our license (CCC1333598), and the work is inspected before we close it out.
Cost & financing
The price of a flat roof depends on square footage, tear-off versus recover, how much insulation and added slope the roof needs, and the edge metal, drains and equipment curbs that have to be detailed. That's why we give you an itemized number after the inspection instead of a per-square guess. Our Miami roof replacement cost guide explains what moves the total.
If you'd rather not pay it all at once, we offer roof financing in Miami with 0% down through programs like PACE, Ygrene and GoodLeap. You can qualify in about 5 minutes, for residential and commercial properties.
Areas we serve
From our base in Coral Gables we work on flat roofs across Miami-Dade, Broward and Palm Beach, including Miami, Coral Gables, Miami Beach, Pinecrest, Kendall, Hialeah, Fort Lauderdale and West Palm Beach. Outside the HVHZ, in Palm Beach County, Florida Product Approval applies instead, and your permit still has to show an approved, tested assembly.
How it works
-
Free inspection
We map seams, drains, edges and any standing water, and photograph every problem area.
-
Repair or replace
We tell you which one the roof needs, checked against the 25% rule and the condition of the deck and insulation.
-
Written scope & permit
An itemized scope naming the approved assembly, then the permit pulled under our license.
-
Install & inspect
Our crew installs the system, details every curb and drain, and the building department inspects the work.
Permits, timeline and warranties
Permits and code
- Flat-roof replacements in Miami-Dade and Broward are permitted under the contractor's license, with inspections. Membranes, fasteners and edge metal must be part of an approved assembly for your deck.
- In the HVHZ, no more than 25% of a roof or roof section can be repaired, replaced or recovered in any 12-month period unless the whole roof or section is redone.
- The Florida Building Code 8th Edition (2023) is in force today; the 9th Edition takes effect on December 31, 2026. We confirm which edition your permit falls under.
Questions to ask any contractor
- Which product approval and which system in it does your proposal use for my deck?
- Is this a tear-off or a recover, and has the existing membrane been uplift-tested?
- Where does the water go, and how does the proposal fix the spots that pond today?
- Which warranty applies, and what does it exclude?
Ask us the same four. We answer them in writing on every estimate.
Related reading
- Commercial & flat TPO vs modified bitumen vs EPDM for flat roofs in South Florida
- Commercial & flat Ponding water on a flat roof: the 48-hour rule, causes and fixes
- Commercial & flat Loose or billowing TPO and EPDM roofs: causes, risks and fixes
- Commercial Flat & low-slope roofing for South Florida buildings (TPO, modified bitumen)
Our other services
Services
- Roof Replacement Full residential roof replacement — tile, metal and architectural shingle.
- Roof Repair Targeted repairs — leaks, slipped tiles, flashing, storm damage.
- Commercial Roofing Flat, low-slope and metal commercial systems — TPO, modified bitumen, standing seam.
- Hurricane Protection HVHZ-rated systems, secondary water barriers and wind mitigation reports.
- Impact Windows & Doors Miami-Dade NOA-approved impact glass — Eco Window Systems and Mr. Glass authorized installer.
- Exterior Paint Stucco prep, crack repair and elastomeric paint systems built for South Florida sun and humidity.
By roof type
- Tile Roofing Clay and concrete tile roofs, installed, repaired and lift-and-relayed to HVHZ code.
- Metal Roofing Metal roof installation and repair, specified for salt air and the HVHZ.
- Shingle Roofing Architectural shingle installation, repair and replacement built to Miami-Dade HVHZ code.
- Roof Painting & Coating Roof painting and coating for sound tile and flat roofs, with the roof checked and repaired first.
Questions about flat roofing
-
Do you install and repair TPO roofs in Miami?
Yes. We install new TPO roofs and repair existing ones on homes and commercial buildings across Miami-Dade, Broward and Palm Beach. Repairs are welded with compatible TPO, and every new roof is built as an approved assembly for your deck, under our license CCC1333598.
-
How much does a TPO roof cost in Miami?
Flat and low-slope roofs are priced by the square after we measure. Square footage, tear-off versus recover, insulation, added slope, edge metal, drains and rooftop equipment all change the total, so you get an itemized number after a free inspection instead of a guess.
-
Do you install and repair elastomeric roof coatings?
We quote elastomeric coatings on flat roofs that are still sound. If the insulation is wet, the membrane is loose or water ponds, the roof needs repair or replacement first, and we tell you so after the inspection.
-
Is standing water on my flat roof a problem?
If it is still there 48 hours after the rain stops, in weather that would normally dry it, yes. That counts as ponding. It wears the membrane faster where the water sits, adds weight to the deck and can affect manufacturer warranties. The fix is usually more slope or more drains, not a different membrane.
-
Should I choose TPO or modified bitumen?
TPO is a white, heat-welded single-ply sheet that reflects sunlight well. Modified bitumen is a multi-ply asphalt system with granule or coated surfacing that handles foot traffic well. The deciding factor in Miami-Dade and Broward is which approved assembly fits your deck and wind load, so we recommend after the inspection.
-
My flat roof membrane lifts in the wind. Is that normal?
Some flutter can be normal on a mechanically fastened roof. A membrane that balloons, stays raised or flaps at the edges usually means air is getting underneath or the attachment has failed. Stay off the roof, take photos from a safe spot and have it assessed before the next strong wind.
-
Do you work on flat roofs on houses or only on commercial buildings?
Both. We work on flat and low-slope sections of homes, additions and modern flat-roof houses, as well as offices, retail, warehouses and condo buildings across Miami-Dade, Broward and Palm Beach.
-
Are you licensed for flat roofing in Florida?
Yes. Art's Roofing & Construction holds Florida roofing license CCC1333598 and general contractor license CGC1541858, is a GAF Certified Commercial Contractor and has a 5.0 rating from 155 Google reviews.
Not the right fit if…
Art's Roofing & Construction repairs and replaces roofs in Miami-Dade, Broward and Palm Beach, under permit, with its own crews. We are probably not the right call if:
- You want the work done without a permit, or the permit pulled in your own name. Every roof replacement here needs a building permit, and it is pulled under our licence (CCC1333598), never the homeowner's.
- You want a product without a Miami-Dade approval. In the High-Velocity Hurricane Zone we install only products with a Miami-Dade Notice of Acceptance or a Florida Product Approval for HVHZ.
- You need a firm repair price before anyone has seen the roof. A leak repair is priced after we find the source. The written estimate is free.
- You want paint or a coating on a roof that is failing. Painting only pays off on a roof that is still sound. We inspect first and tell you if it is not.


