
Miami-Dade County
Roofing Contractor in Miami Beach
Art's Roofing & Construction repairs and replaces roofs in Miami Beach, from our Coral Gables office across the bay.
- GAF Certified Commercial Contractor
- BBB A+
- FL licenses CCC1333598 / CGC1541858
- 5.0 ★ on Google · 155 reviews
- County
- Miami-Dade County, FL
- Code
- Florida Building Code · HVHZ
- Estimated replacement
- $14k–$70k+ (2026 estimate) Learn more
- Nearest office
- 400 University Dr Ste. 400, Coral Gables, FL 33134
- ZIP codes
- 33139 · 33140 · 33141
Miami Beach is its own city with its own Building and Planning departments, and its roofs range from 1930s Art Deco and 1950s MiMo buildings in the historic districts to bayfront homes on the islands and Mid-Beach, all in constant salt air.
Climate and exposure in Miami Beach
Miami Beach is a barrier island inside the High-Velocity Hurricane Zone (HVHZ) that covers all of Miami-Dade. Roofing products need a Miami-Dade NOA or Florida Product Approval, and buildings near the ocean see the full force of wind coming off open water.
Salt is everywhere on the island, between the Atlantic on one side and Biscayne Bay on the other. It attacks fasteners, steel decking, metal coping, rooftop equipment and the flashing at parapets, which is why corrosion-resistant metal is part of every roof we spec here.
Flat roofs dominate the older parts of the city, and Miami's heavy afternoon rain tests their drains and scuppers. A blocked drain behind a Deco parapet can hold water on the roof long enough to find any open seam.
Homes and roof types in Miami Beach
South Beach and Mid-Beach hold one of the largest concentrations of Art Deco and Mediterranean Revival buildings in the country, inside locally designated historic districts such as Flamingo Park, Ocean Drive/Collins Avenue and Española Way. Most are low-rise apartment buildings and hotels with flat roofs hidden behind decorative parapets.
North Beach and the Collins Waterfront area carry Miami Modern (MiMo) buildings from the 1950s and 1960s, also largely flat-roofed, with long parapets, eyebrows and rooftop equipment that need careful flashing.
Single-family homes sit on the islands and in the residential pockets: the Venetian and Sunset Islands, La Gorce, Nautilus, Normandy Isles and Biscayne Point. Many are 1920s–1950s houses with barrel tile, and newer homes often use flat roofs or standing-seam metal.
What permits does a roof need in Miami Beach?
- Miami Beach is its own city. Roof permits are issued by the City of Miami Beach Building Department (City Hall, 1700 Convention Center Drive, with a North Beach office at 962 Normandy Drive), not by the City of Miami or Miami-Dade County.
- Every roof permit also gets a Planning Department review. The City's roofing checklist asks for a dimensioned roof plan, a site plan, gutter and downspout locations, and the current and proposed roofing material and color, and it states that asphalt shingles are not permitted without prior Planning approval.
- Design boards come into play on many properties. Inside a local historic district or on a designated historic site, exterior changes fall under the Historic Preservation Board; elsewhere, the Design Review Board handles design review. When a property has a board order, it must be included with the roof permit, and the roofing plans must match what the board approved.
- The usual HVHZ requirements apply: NOA- or Florida-approved products, a dry-in and final inspection, and a sealed roof deck when the roof covering is replaced, along with the statewide 25% rule and its SB 4-D exemption.
Materials that work in Miami Beach
- Flat roofs on Deco and MiMo buildings get TPO or modified bitumen, but the parapet is the real job: coping, counter-flashing and the joint between membrane and stucco wall are where these roofs leak. We rebuild those details with stainless or coated metal instead of caulking them.
- Concrete or clay barrel tile remains the standard for Mediterranean-style homes on the islands and in Mid-Beach, installed to HVHZ spec with corrosion-resistant fasteners and non-ferrous flashing.
- Standing-seam aluminum with a Kynar finish is the long-life option for modern homes and for owners who want a metal roof near salt water; color and profile go through the City's Planning review.
- Because asphalt shingle needs prior Planning approval in Miami Beach, we discuss tile or metal first and only propose shingle where it has a realistic path to approval.
How much does a roof cost in Miami Beach?
| Material | Estimated installed cost | Notes |
|---|---|---|
| Architectural shingle | $14,000–$26,000 | Lowest up-front cost |
| Standing-seam metal | $30,000–$55,000 | Raised-seam panels |
| Concrete or clay tile | $35,000–$70,000+ | Widest range |
For a home with roughly 2,000–2,800 sq ft of roof, turnkey. See the 2026 Miami cost guide
Our 2026 Miami cost guide puts concrete or clay tile at about $35,000 to $70,000+, standing-seam metal at $30,000 to $55,000 and architectural shingle at $14,000 to $26,000, turnkey, for a home with roughly 2,000 to 2,800 sq ft of roof. These are estimates; island homes are often larger, and shingle depends on Planning approval.
Flat roofs on apartment buildings, hotels and condominiums are priced by the square after we measure and inspect the parapets, drains and equipment. Street access and staging in South Beach can affect the schedule, and we plan them up front.
Repairs are quoted in writing after we diagnose the leak. Historic-district or design-board review adds time to the permit more than cost.
Neighborhoods we serve
South Beach · Flamingo Park · Mid-Beach · North Beach · Venetian Islands · Sunset Islands · La Gorce · Nautilus · Normandy Isles · Biscayne Point
Your roofing contractor in Miami Beach
Art's Roofing & Construction
400 University Dr Ste. 400, Coral Gables, FL 33134
Hours: Monday–Friday 9 am–5 pm · Saturday 9 am–12 pm
Phones: (786) 481-4014 (Miami-Dade) · (954) 526-1699 (Broward)
Estimates are free and done at your home.
Get directions (Google Maps)Sources
- City of Miami Beach — Roofing Commercial & Residential permit checklist (Planning) (miamibeachfl.gov)
- City of Miami Beach — Building Department FAQ (offices) (miamibeachfl.gov)
- City of Miami Beach — Design Review Board (jurisdiction) (miamibeachfl.gov)
- Miami-Dade County — Product Control (NOA) Search (miamidade.gov)
- Florida DBPR — verify a contractor license (myfloridalicense.com)
Last reviewed: by the Art's Roofing & Construction team · Florida Certified Roofing Contractor CCC1333598
- ★★★★★
Wow! Art’s team was absolutely top-notch. They communicated exceptionally well, were incredibly flexible, and catered perfectly to my needs. Best of all, they left absolutely zero mess behind. I cannot recommend them highly enough!
Maikel Toledo · Google - ★★★★★
Amazing experience with Juan, George and the whole team! The roof turned out beautifully! They came when they said they would and nothing fell behind schedule. They also cleaned the area throughout the project making sure everything was safe from nails or other debris. Would recommend to anyone looking to redo their roof! Top tier communication, professionalism and amazing workmanship!
Saily M Gutierrez · Google - ★★★★★
Arts Roofing delivered an exceptional roof and windows project for us. Eddison, the project manager, was professional, organized, and ensured the work was completed efficiently with top-quality results.
Dash Equity · Google
Roofing questions in Miami Beach
-
Who issues roof permits in Miami Beach?
The City of Miami Beach Building Department, at City Hall (1700 Convention Center Drive) with a North Beach office at 962 Normandy Drive. Miami Beach is its own city, so the City of Miami and Miami-Dade County do not issue its roof permits. The Planning Department also reviews each roof permit for material and color. We file under our license and schedule inspections.
-
Can I put a shingle roof on my house in Miami Beach?
Only with prior approval. The City of Miami Beach roofing checklist states that asphalt shingles are not permitted without prior Planning approval, and the approval number must be provided with the permit. In practice most Miami Beach homes re-roof in concrete or clay tile, standing-seam metal or a flat-roof system. We check your property's situation before recommending a material.
-
My building is in a Miami Beach historic district. What does that change for the roof?
Exterior changes in a local historic district fall under the Historic Preservation Board and its staff, not the Design Review Board. If your property has a board order, it is scanned into the permit plans, and the roof must match what was approved. A like-for-like flat-roof replacement hidden behind a parapet is simpler than changing a visible tile roof.
-
Why do flat roofs on Art Deco buildings leak at the parapet?
Decorative parapets surround most Deco roofs, and the joint where the membrane turns up the stucco wall is the weak point. Cracked stucco, failed coping and corroded counter-flashing let water behind the membrane, and blocked drains keep it there. Caulk is a temporary fix. We open the detail, rebuild the flashing and coping and tie it properly into a new or existing membrane.
-
How much does a roof replacement cost in Miami Beach?
Our 2026 cost guide puts concrete or clay tile at about $35,000 to $70,000+, standing-seam metal at $30,000 to $55,000 and architectural shingle at $14,000 to $26,000, turnkey, for a home with roughly 2,000 to 2,800 sq ft of roof. Island homes are often larger, and shingle needs Planning approval. Flat roofs on buildings are priced by the square after measuring.
-
Do you do roof repair in Miami Beach?
Yes. Art's Roofing & Construction repairs roofs across Miami Beach, from parapet and drain leaks on flat Deco and MiMo roofs to slipped tile and corroded flashing on island homes. The inspection is free, we photograph where the water gets in, and the repair is quoted in writing after diagnosis. When water is coming in, we can tarp the same day.
-
How do I choose a roofer in Miami Beach?
Verify the Florida license with the DBPR, get insurance certificates, and ask whether the contractor knows the City of Miami Beach process: the Planning review of material and color, the shingle restriction and any board order. A written estimate should list NOA numbers and corrosion-resistant fasteners. Art's Roofing & Construction holds licenses CCC1333598 and CGC1541858, is a GAF Certified Commercial Contractor and BBB A+ accredited.




